How to flash samsung corby 2 GT-S3850

well ladies and gentleman in here and in this post I'd like to share for you all about How to flash samsung Corby 2 GT-S3850, this tips i write from my experience when i flashing my samsung corby 2 GT-S3850.
now i want to share for you all about this. there are many mistake people do flash samsung corby 2. because that there are many people which her phone has a bootloop now you have lucky cause you visits my blog and reading the post in my blog.
okey this the tips to How To Flash samsung corby 2.

you must prepare the equipments
-samsung USB Driver download at this : http://adf.ly/pI9EC
-multiloader download at this : http://adf.ly/paHoN
-firmware download at this : download many firmware samsung corby 2

now you can read the tips in below

1. install samsung USB driver
2. extract file firmware 
3. backup your file in phone memory as contact, memo, file in phone etc except file in memory card. because, that file will be lost
4. after back Up, turn off your phone
5. press and hold together button lock + menu + volume up, until showed written Download.
6. plug in your cable data to connect phone to PC
7. open multiloader 
8. active/tick BRCM2133
9. go to folder firmware which after extract
10. look the file if there is a folder BOOTFILES active/tick full download in multiloader and click Boot and browse folder BOOTFILES in folder firmware if your firmware, and if there is nothing a folder BOOTFILES don't active/tick full download and click Amms and change app_compressed.bin in folder firmware
11. click Apps and browse App_compressed.bin in folder firmware
12. click Rsrc1 and browse file .rc1 in folder firmware
13. click Rsrc2 and browse file .rc2 in folder firmware
14. click Factory FS and browse file .ffs in folder firmware
15. click CSC and browse file .csc in folder firmware
16. click SHP APP and browse  ShpApp.app in folder firmware
17. click FOTA and browse file .fota in folder firmware if there is that file in folder firmware, and if nothing leave blank.
18. click PFS and browse file .pfs in folder firmware if there is that file in folder firmware, and if nothing leave blank.
19. click port search until text download beside text port search be bold
20. click download and wait the loading 
21. after download file complete dislodged your cable data and wait the loading in the phone like bluescreen but installation
22. your phone have a ready with new firmware 

  Attention :

• mistake in multiloader with text "serial port error" the mistake there is in or the cable data is not support for samsung 
• mistake in multiloader with the text "download" is can't click after click port search the mistake there is in samsung USB driver is not installed

  if you have a new mistake comment in here and i will answer the solution if a have a time to online

OK that all thanks for visits  
good by ,, see you ,,, 
 

Description: How to flash samsung corby 2 GT-S3850 Rating: 3.5 Reviewer: Ikmalil Birri ItemReviewed: How to flash samsung corby 2 GT-S3850