malikmal: Learning

Nextion Enhanced Stepper Motor Piano Project

IntroductionNextion is a programmable human machine interface (HMI) that can be customized and designed to simplify the interaction between y...

Hacking Robotic Arm using Controllino and Cayenne

Description This tutorial will show you how to take over the controls of ...

Prextron CHAIN BLOCKS - Arduino Nano controlled Ultrasonic sensor that switches a motor wirelessly using 433MHz RF modules and a relay board.

Description In this tutorial, I will be evaluating Prextron CHAIN blocks – a ne...

Garage Door Monitor with Cayenne

Description Using the HMC5883L magnetometer sensor of the GY-80 module from I...

HMC5883L on the GY-80 module

Description In this tutorial, I will show you how to configure and extract data from the ...

EspoTek Labrador Review

Have you heard about the EspoTek Labrador ? A tiny board which can turn your computer into an- Oscilloscope- Waveform generator- Logic analyser-...

EasyEDA RGB5050 LED Scroll Bar

Guest Post Disclaimer This is a guest post by the EasyEDA team. I would like to thank EasyEDA for ...

NeoPixel Heart Beat Display

Oleh Unknown

Project Description In this project, your heart will control a mesmerising LED sequence on a 5 metre Neopixel LED strip with a ws2812B chipset. Every heart beat will trigger a LED animation that will keep you captivated and attached to your Arduino for ages

Description: NeoPixel Heart Beat Display Rating: 3.5 Reviewer: Unknown ItemReviewed: NeoPixel Heart Beat Display

Neural Network (Part 5): The Back Propagation process

Oleh Unknown

Back-propagationBack propagation is the process by which you move backwards through the neural network to adjust the weights and biases so as to reduce the total error of the network. The total error of the network is essentially the difference between the end results (actu

Description: Neural Network (Part 5): The Back Propagation process Rating: 3.5 Reviewer: Unknown ItemReviewed: Neural Network (Part 5): The Back Propagation process